Liquifast 1402

Articlenumber: P001449
For gluing windshields, rear and side windows on vehicles. Can not be used if the manufacturer requires a high modulus and/or non-conductive pane adhesive, e.g. for glass-integrated antennas and heaters.

Details

1K-PUR window repair set, normal-modulus, conductive. Proven OEM quality. Fast hardening properties. Cold processing. TÜV approved. Drive-away time: With airbag 1.5 hours, Dual airbag 3.0 hours
product variants
Product Name SKU Bundle Languages
Liquifast 1402 6136 310 ml Cartridge aluminum D-GB-P-I
Liquifast 1402 6137 400 ml Bag aluminum D-GB-F-I-E-NL-P

Additional Information

Description Liquifast 1402 is a single component, cold application, moisture curing bonding agent used as a direct glazing sealant for repairing vehicles windows. Liquifast 1402 was tested in a crash by the TÜV testing agency. The bonding agent is characterized by its extremely fast hardening properties and excellent rigidity. Vehicles whose windows were bonded using Liquifast 1402 are ready to be driven after just 1.5 hours (with driver airbag only) or 3 hours (with driver and front passenger airbag) of drying time according to general test conditions.
Application 1. Cleaning agent
The surfaces to be bonded have to be dry and free of oil, dust, grease and other dirt residues. The glass surface or the ceramic coating has to be cleaned with Liquiclean or cleaning and diluting agent, Item No. 6130, and then with the glass-cleaning foam Item No. 1512. Also the car body flange or the newly painted car body parts are to be cleaned that way. We recommend cleaning the cut back residual adhesive bead with Liquiclean or cleaning and diluting agent as well. Before the sealant is applied, or before the glass surface is bonded, the cleaned holding surface has to have dried completely.
2. Priming / activation of pre-coated glass panes
Active Primer is necessary for the priming of the holding surface, when glass panes are to be bonded. The Active Primer is included in the delivery of the glass pane repair set as 10 ml stick. Prior to use, shake Active Primer well for at leas 45 sec. Within the bond area, Active Primer can universally be applied on the cleaned glass surface or the ceramics silk screen, on the clean painted surface of newly painted parts of the car body, on the cut back residual adhesive beads, as well as on pre-coated glass panes (PUR and RIM coating). Apply Active Primer sparsely and uniformly (wet film has to have a thickness of approx. 0.05 mm). The primed surface has to dry for approx. 15 minutes before the glass adhesive is applied.
If the residual adhesive bead has been cut back more than 6 hours ago, a pre-treatment with Active Primer is mandatory.
Package Unit 12
Pallet Unit 1152
  •  PERSONAL ADVICE

    We are glad to help you:
    Phone +49 731 1420-0 or
    via our contact form.

  •  MADE IN GERMANY

    Top quality based on research, development and production
    in Germany.

  •  VARIETY OF
    PRODUCTS

    Choose over 4.000 articles.
    All from one source.