|Description||Cold-application, moisture-curing, 1-component polyurethane adhesive for bonding front, rear and side windows on vehicles in the case of repairs. This type of adhesive is especially prescribed if the vehicle windows contain heating elements or vehicle antennas. Is distinguished through a very high initial strength (high tack effect). This allows a clean application even of high adhesive beads and prevents the sinking or slipping of heavy or sloping panes directly after bonding. The high shear modulus of Liquifast 9000 contributes to a clear increase in the torsional stiffness, more driving safety and higher traveling comfort. The low electrical conductivity of the adhesive prevents potential contact corrosion on the body. It can be used with 0.5 hours of downtime and drive-away time at temperatures from –15 °C (!). This enables the use of the adhesive even under adverse weather conditions. TÜV tested.|
1. Cleaning agent
The surfaces to be bonded have to be dry and free of oil, dust, grease and other dirt residues. The glass surface or the ceramic coating has to be cleaned with Liquiclean or cleaning and diluting agent (part no. 6130), and then with the Windshield Cleaner Foam (part no. 1512). Also the car body flange or the newly painted car body parts are to be cleaned that way.
We recommend cleaning the cut back residual adhesive bead with Liquiclean or cleaning and diluting agent as well. Before the sealant is applied, or before the glass surface is bonded, the cleaned holding surface has to have dried completely.
2. Priming / activation of pre-coated glass panes
Active Primer is necessary for the priming of the holding surface, when glass panes are to be bonded. The Active Primer is included in the delivery of the glass pane repair set as 10 ml stick. Prior to use, shake Active Primer well for at leas 45 sec. Within the bond area, Active Primer can universally be applied on the cleaned glass surface or the ceramics silk screen, on the clean painted surface of newly painted parts of the car body, on the cut back residual adhesive beads, as well as on pre-coated glass panes (PUR and RIM coating). Apply Active Primer sparsely and uniformly (wet film has to have a thickness of approx. 0.05 mm). The primed surface has to dry for approx. 15 minutes before the glass adhesive is applied. If the residual adhesive bead has been cut back more than 6 hours ago, a pre-treatment with Active Primer is mandatory.
Recommendations for use are provided in the accompanying brochure!
|Bezpečnostní list CZ|
|Safety data sheet EN|
|Ficha de datos de seguridad ES|
|Fiche de données de FR|
|Scheda dati di sicurezza IT|
|Ficha de segurança PT|
|Fişa cu date de securitate RO|
|Varnosti list SL|
|Fiche de données de FR-CH|
|Scheda dati di sicurezza IT-CH|
|Produktinformation DE 23.0|
|Product information EN 23.0|
|Информация к продукту RU 23.0|
|Información del producto ES 23.0|
|Produktinformatie NL 23.0|
|Information produit FR 23.0|