Liquifast 9000 (Bag-set)

Articlenumber: 6028
Bonding of windshields, rear windows and side windows to vehicle bodies (passenger vehicles, heavy goods vehicles, the drivers' cabins of tractors and forklift trucks and special vehicles).

Details

Bag set consisting of:
• 1 x Liquifast 9000, 400 ml
• 1 x Liquiclean, 30 ml
• 1 x Active Primer, 10 ml stick
• 1 x nozzle
• 1 x adapter for Flexpack 
• 1 x disposable gloves
• 1 x instructions for use

Additional Information

Description Cold-application, moisture-curing, 1-component polyurethane adhesive for bonding front, rear and side windows on vehicles in the case of repairs. This type of adhesive is especially prescribed if the vehicle windows contain heating elements or vehicle antennas. Its very high initial stability (high tack effect) enables a clean application even of high adhesive beading and prevents the sinking or slipping of heavy or sloping panes directly after glazing. The high shear modulus of Liquifast 9000 contributes to a clear increase in the torsional stiffness, more driving safety and higher traveling comfort. The low electrical conductivity of the adhesive prevents potential contact corrosion on the body. It can be used with 0.5 hours of downtime and drive-away time at temperatures from –15 °C. This enables the use of the adhesive even under adverse weather conditions. TÜV tested.
Content 1 Stk
Application

1. Cleaner
The bonding surfaces must be dry and free of oil, dust, grease and other contamination residues. The glass surface or ceramic coating is cleaned with Liquiclean or Cleaner and Thinner (part no. 6130) and then with Windshield Cleaner Foam (part no. 1512), as are the bodywork flange or newly painted body components. We recommend also cleaning the remaining adhesive beading that has been trimmed back with Liquiclean or Cleaner and Thinner. Before applying the sealant or bonding the window, the cleaned bonding surface must be completely dry.

2. Priming/activation of pre-coated windows
Active Primer is required for adhesive pre-treating during window bonding. The Active Primer is included in the set as a 10 ml stick. Shake Active Primer well for at least 45 seconds before use. Active Primer can be applied universally in the bonding area thinly and evenly (approx. 0.05 mm wet-film thickness) on the cleaned glass surface or ceramic screen printing, on the clean paint surface of newly painted car-body components, on remaining adhesive beadings that have been trimmed back and pre-coated windows (PUR and RIM coatings). The primed surface must flash off for approx. 15 minutes before the windshield adhesive is applied.
If the remaining adhesive beading was cut back more than 6 hours ago, pre-treatment with Active Primer is specified as binding.

Package Unit 12
Pallet Unit 288
  •  PERSONAL ADVICE

    We are glad to help you:
    Phone +49 731 1420-0 or
    via our contact form.

  •  MADE IN GERMANY

    Top quality based on research, development and production
    in Germany.

  •  VARIETY OF
    PRODUCTS

    Choose over 4.000 articles.
    All from one source.