Rust Protection Wax brown

Articlenumber: 6104
As a preventive measure or for the subsequent preservation of all exterior or interior body parts such as wheel arches, seams, surfaces as well as for the treatment of vehicle parts, e.g. chassis, engines, transmissions and axles.

Details

Wax-based corrosion inhibitor. Quick drying and very workable. Penetrates well into the narrow spaces to be protected due to excellent creep properties. The dried film has good adhesion and corrosion-protection properties. High solids content.

Additional Information

Description Solvent-based coating material which is used as a corrosion inhibitor based on waxes, esters, resins, solvents and special inhibitors. Penetrates well into the narrow spaces to be protected (e.g. welding seams) due to excellent creep properties. The dry film has good adhesion and corrosion-protection properties and does not easily run out of the seams. Is therefore mainly used as a preservative and as a preventative measure in repair work and after-treatment on vehicles, construction machinery and in agricultural applications.
Content 1 l
Application

Clean the surfaces to be treated thoroughly in advance and remove any rust. Surfaces must be dry and free of dirt and grease and extensively free of dust.

Can be applied using the UBS Spray Gun (part no. 6219) or the Compressed Air Can Gun (part no. 6220) at an operating pressure of approx. 3 bar. Can is to be shaken vigorously before use. Can be applied to vertical surfaces in a single application. The vehicle is ready for driving after about 2–3 hours, depending on the weather conditions and coating thickness. Final through-drying after approx. 12–24 hours.

Package Unit 12
Pallet Unit 600
  • Underseal
  •  PERSONAL ADVICE

    We are glad to help you:
    Phone +49 731 1420-0 or
    via our contact form.

  •  MADE IN GERMANY

    Top quality based on research, development and production
    in Germany.

  •  VARIETY OF
    PRODUCTS

    Choose over 4.000 articles.
    All from one source.