Stoneguard, black (Spray)

Articlenumber: 6109
For renewing and supplementing factory-applied stoneguard on rear valances, spoilers, front ends, sills etc. and for spraying textured surfaces.

Details

Solvent-based, permanently elastic and viscous coating compound with optimum covering power. After through-drying, provides abrasion-resistant corrosion protection with good stoneguard properties and excellent anti-drum effect. Can be painted over wet-in-wet and is PVC compatible. Coloring possible by adding the original car paint.

Additional Information

Description

Finely atomizing coating compound based on synthetic resin. The dried film has very good adhesion properties on both unpainted and painted sheet steel. Convinces thanks to its good covering power, outstanding corrosion protection, high abrasion resistance as well as optimal stoneguard properties. Is also quick drying and can already be painted over after approx. 10 min with commercial vehicle paint systems.

Content 500 ml
Application

Clean the surfaces to be treated thoroughly in advance and remove rust, if necessary. The surfaces must be dry and free of wax, dirt and grease and largely free of dust.

Best suited for use at room temperature. Shake well before use. When the ball has worked loose, continue to shake the can for a further minute. Hold the can vertically when spraying and spray thinly at a distance of about 20–30 cm from the surface. The resistance to abrasion and corrosion increases with increasing coating thickness. For this reason, the spraying process should be repeated once or twice after a short flash-off period. Stoneguard should be sprayed using a cross pattern to avoid spray shadowing. If the coating is to be painted over later on, the layer becomes increasingly hard, which means that the treated surface must be treated like a plastic, i.e. with adhesive primer for plastics.

Recommended drying:
Infrared or oven drying (60 °C). Drying at room temperature significantly extends the through-drying period.

Package Unit 12
Pallet Unit 840
  • Underseal
  •  PERSONAL ADVICE

    We are glad to help you:
    Phone +49 731 1420-0 or
    via our contact form.

  •  MADE IN GERMANY

    Top quality based on research, development and production
    in Germany.

  •  VARIETY OF
    PRODUCTS

    Choose over 4.000 articles.
    All from one source.