Stoneguard, black

Articlenumber: 6110
For renewing and supplementing factory-applied stoneguard on rear valances, spoilers, front ends, sills etc. and for spraying textured surfaces.

Details

Solvent-based, permanently elastic and viscous coating compound with optimum covering power. After through-drying, provides abrasion-resistant corrosion protection with very good stoneguard properties and excellent anti-drum effect.

Additional Information

Description

Solvent-based, viscous, sprayable coating compound based on synthetic resin. Convinces through excellent covering power, particularly fast drying and ability to be painted over. After through-drying, provides abrasion-resistant corrosion protection with very good stoneguard properties and excellent anti-drum effect. The dried film has good adhesion properties on unpainted and painted sheet steel as well as plastics which have been coated with primer or filler. Can be painted over using commercially available paint systems, is easy to grind after through-drying and is resistant to solvents.

Content 1 l
Application

Clean the surfaces to be treated thoroughly in advance and remove rust, if necessary. The surfaces must be dry and free of wax, dirt and grease and largely free of dust.

The adhesion is improved if the surface to be treated is roughened first and the product is applied in cross coats. The stoneguard can be applied with the UBS Spray Gun (part no. 6219) or the Compressed Air Can Gun (part no. 6220) at an operating pressure of 3 – 4 bar depending on the desired spray pattern.

Depending on the coat thickness, temperature and humidity, can be painted over after approx. 60 – 90 min with most common conventional 1-component, 2-component and water-based paints.

Shake can well before use. Do not leave containers standing open.

Note:
With thicker layers, it is recommended that you allow the product to dry between the application of different coats.

If the coating is subsequently painted over, the coats will become increasingly hard, meaning that the treated surface should be treated accordingly with adhesive primer for plastics in the same way a plastic surface would be.

Package Unit 12
Pallet Unit 600
  • Underseal
  •  PERSONAL ADVICE

    We are glad to help you:
    Phone +49 731 1420-0 or
    via our contact form.

  •  MADE IN GERMANY

    Top quality based on research, development and production
    in Germany.

  •  VARIETY OF
    PRODUCTS

    Choose over 4.000 articles.
    All from one source.