Wax Underseal, anthracite/black

Articlenumber: P003463
For underbody and fender after repairs. Maintenance of PVC underbodies. Repairing damages to the underbody


Corrosion protection that with its waxes and resins forms a sealed protective film. Low mist processing. Fast drying. The material can be finely sprayed and has good stability. High amount of solids content.
product variants
Product Name SKU Bundle Languages
Wax Underseal, anthracite/black 6102 1 l Can sheet metal D-GB-I-NL-P
Wax Underseal, anthracite/black 6120 60 l Drum sheet metal D-GB-F-I-E-NL-P

Additional Information

Application The surfaces which are to be treated with wax underseal must be thoroughly cleaned beforehand. Rust must be removed. The surfaces must be dry and free of dirt and grease and extensively free of dust. Wax Underseal can be applied using the UBS spray gun, Part no. 6219 or the pressure-feed spray gun, Part no. 6220 with an operating pressure of 2 - 8 bar depending on the spray pattern desired. Because of the product's excellent stability, the material can be applied with a coating thickness up to approx. 1 mm. The processing temperature and the temperature of the surface being treated must not drop below 10 C. The vehicle will be ready to drive after about 2 hours, depending on the weather conditions and coating thickness. Final through-drying takes approx. 12 - 14 hours.
Package Unit 12
Pallet Unit 600
  • Underseal

    We are glad to help you:
    Phone +49 731 1420-0 or
    via our contact form.


    Top quality based on research, development and production
    in Germany.


    Choose over 4.000 articles.
    All from one source.