Liquifast 9000

Articlenumber: 6171
Bonding of windshields, rear windows and side windows to vehicle bodies (passenger vehicles, heavy goods vehicles, the drivers’ cabins of tractors and forklift trucks and special vehicles).

Details

Cold-application, moisture-curing, single-component polyurethane adhesive for bonding front, rear and side windows on vehicles in the case of repairs. This type of adhesive is especially prescribed if the vehicle windows contain heating elements or vehicle antennas. It can be used with 30 minutes of downtime and drive-away time at temperatures from -15 °C (!). This enables the use of the adhesive even under adverse weather conditions.

Additional Information

Content 400 ml
Application 1. Cleaning agent
The surfaces to be bonded have to be dry and free of oil, dust, grease and other dirt residues. The glass surface or the ceramic coating has to be cleaned with Liquiclean or cleaning and diluting agent (part no. 6130), and then with the Windshield Cleaner Foam (part no. 1512). Also the car body flange or the newly painted car body parts are to be cleaned that way.
We recommend cleaning the cut back residual adhesive bead with Liquiclean or cleaning and diluting agent as well. Before the sealant is applied, or before the glass surface is bonded, the cleaned holding surface has to have dried completely.
 
2. Priming / activation of pre-coated glass panes
Active Primer is necessary for the priming of the holding surface, when glass panes are to be bonded.  The Active Primer is included in the delivery of the glass pane repair set as 10 ml stick. Prior to use, shake Active Primer well for at leas 45 sec. Within the bond area, Active Primer can universally be applied on the cleaned glass surface or the ceramics silk screen, on the clean painted surface of newly painted parts of the car body, on the cut back residual adhesive beads, as well as on pre-coated glass panes (PUR and RIM coating). Apply Active Primer sparsely and uniformly (wet film has to have a thickness of approx. 0.05 mm). The primed surface has to dry for approx. 15 minutes before the glass adhesive is applied. If the residual adhesive bead has been cut back more than 6 hours ago, a pre-treatment with Active Primer is mandatory.

Recommendations for use are provided in the accompanying brochure!
Package Unit 12
Pallet Unit 720
  •  PERSONAL ADVICE

    We are glad to help you:
    Phone +49 731 1420-0 or
    via our contact form.

  •  MADE IN GERMANY

    Top quality based on research, development and production
    in Germany.

  •  VARIETY OF
    PRODUCTS

    Choose over 4.000 articles.
    All from one source.