Stoneguard, black (Spray)

Articlenumber: 6109
For refurbishing and complementing the factory stoneguards on lower back panels, spoilers, frontends, sills, etc. For spaying structured finishes.

Details

Solvent-based, permanently elastic and viscous coating compound with optimal covering attributes. After full curing, the coating develops abrasion-proof corrosion protection with good stoneguard properties and outstanding anti-drone action. Can be painted over wet-in-wet, PVC compatible. Coloration by mixing with the original car paint feasible.

Additional Information

Content 500 ml
Application

Surfaces which are to be treated with stoneguard must be thoroughly cleaned beforehand. Rust must be removed. The surfaces must be dry and free of wax, dirt and grease and extensively free of dust.

The material is best suited for use at room temperature. Shake can vigorously. When the ball has worked loose, continue to shake the can for a further minute. Hold the can vertically when spraying and spray thinly at a distance of about 20 - 30 cm from the surface. The resistance to abrasion and corrosion increases with increasing coating thickness. For this reason, the spraying process should be repeated once or twice after a short flash-off period. Underseal spray should be sprayed using a cross pattern to avoid spray shadowing. If the coating is to be painted over later on, the layer becomes increasingly hard, which means that the treated surface must be treated like a plastic, i.e. with adhesive primer for plastics.

Shake well before use!

Recommended drying
Infrared or oven drying (60° C). Drying at room temperature significantly extends the through-drying period.
Package Unit 12
Pallet Unit 840
  • Underseal
  •  PERSONAL ADVICE

    We are glad to help you:
    Phone +49 731 1420-0 or
    via our contact form.

  •  MADE IN GERMANY

    Top quality based on research, development and production
    in Germany.

  •  VARIETY OF
    PRODUCTS

    Choose over 4.000 articles.
    All from one source.